66 dart convertible

I'm in a slow down mode so far .. getting ready to head up to michigan foe a couple of weeks to get a friends car ready for the dream cruise. but I
did get a little more done on the dartr
I finished redoing the heater core and box. (still need a door for the passenger side vent for the second heater box I'm doing but I'll get that when I start on the other dart. I found out that I don't have al the parts for the top to go on and have been if a little bit of a bind until I found parts of the pieces that hold the top to the header.
here's my first try on the outside pieces that the header seal will glue to .
here's the one and only side piece I found.
View attachment 0803121713.jpg

View attachment 0803121713a.jpg

View attachment 0803121714.jpg

View attachment 0803121714a.jpg

View attachment 0803121715.jpg

I still have to run it through the bead roller for a finished look on the edges and finish drilling out the holes but IT fits good!
View attachment 0803121715a.jpg

View attachment 0803121729.jpg

View attachment 0803121730.jpg



the next part will be a ***** to do (it's the piece that goes in between these 2 pieces and really holds in the top and header seal.)
I've almost got the shape done in 1/2 x1/2 inch square stock , still tweaking the curve to fit the header panel better, you know the drill. heat, bend, check fit and discover you bent it the wrong way and do it all over!