JTG, which kit in particular, Kelsey Hayes or single piston? Are your 14sbp original to your car? Curious as to how yours clear the calipers, different offset perhaps.
Hi Dan, went with kit# W153 from SSBC, the center section of my rims are original but the surrounding rings are new ( brand new Kelsey Hayes rims were used ), this is allowed me to get sbp 14x6" on the front and sbp 14x8" on the rear. Not sure on the offset will need to get under the car and measure, my rims sit further out then factory, probably flush with the inner wheel well lip.
Upon the installion of the SSBC kit the brake lines going into the calipers required slight realignment to help clear the rims and a quarter inch wheel spacer on each side because the rims were just slightly making contact with the caliper housings. I've had zero problems once these minor corrections were made.