'67 Barracuda finally has paint!

Just wanted to share this info for those using the original Magnum serpentine setup on their cars... As you probably know, the stock Magnum truck PS pump sticks out a mile and hits the battery tray. I have heard about using the PS bracket from a van that brings the pump closer to the crankshaft, but I couldn't find one nearby.

I did, however, find a pump and bracket from a late 90's Grand Cherokee V8. It bolts right on and brings the pump 4" closer to the center of the car and 2" higher. I tapped the suction side of the pump so I can use a remote reservoir.

Note: I found out later that a 98 Wrangler 4cyl pump is already set up for a remote reservoir. I'll be using that pump next time...

Pics below show the layout difference between the Truck pump and Jeep/Viper setup. Hope this helps you guys who want to run a serpentine setup...

Scott