Curleysparts

You are a CHUMP!! Two sets of bent tubular control arms and a month's worth of unreturned messages has lead me to belive this. Thanks for taking my money and sending me your half *** parts.

First set (the one that came with bushings for the heim joints) had such poor geometry and garbage bushings you clearly didn't test ripped a heim joint out in the burnout box when I started to do a burnout and the car pushes against the fronts a little. Your **** bushings caused it to bind because they were not tapered for joint movement and POP! Lucky it didn't happen at the big end and I stuff the car at 12x mph.

Second set (originally purchased for the other car) I put on, this time I bought a quality heim joint and I machined the bushings you supplied for clearance (obviously too hard for you to grasp) They fit fine and allowed me to put a great alignment in the car. I used that alignment for about 10 miles then I found some street action (IDC what your thoughts are on street racing) so I prep and do the first burnout, on the second burnout as I'm stopping the car I feel the wheel rip to the right about 3 turns. Your pile of crap control arm straight up bent, big kink in it!!! Not the joint (I supplied) or the bushing (I made work) but the upper control arm that YOU BUILT!! So thank you for almost wrecking my car twice in one month. Take a little pride in what you do and in your business and make this right! Return the calls you get from me almost daily. I don't know how you can call your shop Curley's Racing Components, hell I've never made it past the burnout on your "components"

Kyle, call me back and make this right, have a damn back bone dude!

If anyone else wants to donate to his profit for pocket charity, visit Kyle Curley at http://curleysracecarsandcomponents.zenfolio.com/

But I can't reccomend it, unless you're into wrecked cars and F'd up burnouts and getting ripped off, I work too hard to pay clowns like this.

Dylan.