Anyone running a hydraulic clutch with their 833?

7duce swinger said

Im curious, gtmopar what is it that your selling? Just the mcleod To bearing or a whole kit? Hydraulic To bearing only, or master cyl. , lines, and hyd. bearing etc.? Im going to be doing a hydraulic conversion, so im trying to get all the info i can, sorry if it seems like im trying to intervene, on your sale between someone else. Is there a specific master bore size that you have to use with hydraulic throw out bearings too? As in the same way you have to match the bore of the master to the slave?

Click to expand...

You definitely have to size the master cylinder to be compatible with the hydraulic throwout bearing, or else you might over-pressurize it or not supply enough pressure to release the clutch disc completely.

However, this depends on the amount of stroke that you have on the input shaft of the master cylinder (which is affected by where you attach the master cylinder input shaft on the clutch pedal).

If you PM me your e-mail, I can send you the calculator that I put together for determining the amount of bore/stroke you need from a master to satisfy the requirements of a slave cylinder. It could be modified to be used for a hydraulic throwout bearing fairly easily.

-Mike