Windshield Help!!
you can do it, it is a bit hard. there might be a couple threads here if you do a search.
Rubber goes in the windshield frame.
make sure the zip locking strip is "open"
put the bottom of the windshield in the rubber channel
apply some liquid soap liberally to the edge of the rubber to allow it to slide
now you need a tool like this (or two)
6zBPKK-OVOr!~~60_35.JPG)
use it to work the bottom corners of the glass into the rubber
then up both sides, and top corners.
Very frustrating, because you think it is not going to go.
Keep working and taking breaks as needed. My hands get tired of wiggling and wobbling the tool back and forth to work the rubber over the glass
once that is done you can zip the strip in.
During the whole process, you can gently "slap" the windshield with the flat of your palm...the glass will take a lot of pressure, biggest culprit of breakage is hitting the edge of the glass with a screwdriver or such tool.
you can do it, it is a bit hard. there might be a couple threads here if you do a search.
Rubber goes in the windshield frame.
make sure the zip locking strip is "open"
put the bottom of the windshield in the rubber channel
apply some liquid soap liberally to the edge of the rubber to allow it to slide
now you need a tool like this (or two)
use it to work the bottom corners of the glass into the rubber
then up both sides, and top corners.
Very frustrating, because you think it is not going to go.
Keep working and taking breaks as needed. My hands get tired of wiggling and wobbling the tool back and forth to work the rubber over the glass
once that is done you can zip the strip in.
During the whole process, you can gently "slap" the windshield with the flat of your palm...the glass will take a lot of pressure, biggest culprit of breakage is hitting the edge of the glass with a screwdriver or such tool.