Need help on Turbocharging a 318

7duce swinger said

Okay, im thinking the best place to do it would be the pan then. At the back of the block, there is holes with fittings in them. Can i run the lines for the oil to the turbo there, or is there not enough pressure there.. Is that where you are getting your oil from?

Click to expand...

Yes that is where I get the oil to feed the turbos from. That hole I 3-way tee'd off of is the factory hole for the Oil Pressure Sending Unit. There is plenty of oil to feed the turbo's from that spot. I still run the Oil Pressure Gauge in that spot but use a Mechanical Gauge instead "Plastic Tube that gets filled with oil at start up all the way to the back of the Gauge"