Need help on Turbocharging a 318

A T72 sounds too big for my tastes especially for esentially a stock 318. I am by no means an engineer so please forgive me, but I have a little bit of real world experience. I ran a T04 Turbonetics turbo with an H3 compressor and a .68 A/R. This was on a stock 318 in a A body with a 904 trans stock converter and 3.23 gears. It ran 12.00s at 112. It had no intercooler and we ran it on race gas at 12 pounds of boost. It spooled a little lazy but once it started to spool it ramped up pretty quick. I believe that this set up is what the op is looking for. My kit was a draw through ( I know how archaic, lol) with a 750 holley and no intercooler. Obviously running a blow through would allow intercooling or even meth injection for a draw through. If you want to build a draw through carb for cheap go to the turboforums and look up the "hanger 18" carb, those mods were developed on my car. Lots of head scratching. Anyways the T04 will bolt up to the T3 flange as well as the T3/T4 hybrid which would also work but I think the T04 is a better choice from my experience.