Anyone running a hydraulic clutch with their 833?

73SwingerBuild said
....Take it from a guy that's been there. Pulling tranny's after the driveline is installed is no fun.

Just my $0.02

-Mike

On what vehicle???

With my Demon it's a 30 min or less job once it is up on jackstands. No power tools involved.

6 bolts/nuts on header collectors
4 bolts on the u-joint straps
3 bolts on the shifter mount
3 nuts on the shift levers
4 bolts on the trans crossmember
unplug the reverse sender switch
4 bolts connect the trans to bellhousing

Slide it out. Easy peasy.

Wylde1.