Florida "Key Lime" 76 Duster Build

Included with the spoiler, you get your 1/4" studs and a set of washers and standard nuts.....they're OK I guess, BUT I opted to use the real deal.....Factory nuts are available as a repop, and they look right, AND cover the extra threads.

I NEVER use a wrench when installing these nuts.....Being sure the spoiler is setting down FLAT to the trunk lid, I install a flat washer and the factory nut under the bracket......I FINGER tighten it.....I install the second nut the same way......THEN, moving to the other side, I repeat it......After a close inspection to be sure it's again FLAT on the lid, I gently press the Go-Wing DOWN onto the lid one side at a time, and again FINGER TIGHTEN the factory bolts to snug them in.......If you OVERTIGHTEN them, you'll adversely draw down your lid and get big dimples around the spoiler. When it's just right, add a drop of lock-tight on the tip of the nut if you want.

If you've done it as stated, you'll have a perfectly installed Go-Wing.