Need help lost brakes
We try it but did not work
What was the "it" that you tried?
If a new MC, most come with a plastic "bench bleed" kit inside. You screw those in the output ports and loop the tubes back to the reservoir, fill with fluid, and keep pumping the pedal slowly until no more bubbles come out. Then connect to your vehicle tubing and bleed the wheel cylinders. If just changing the MC, you often don't even need to bleed at the wheels since the brake fluid just sits at the top of the tubes with no space for a bubble.
Anyway, the MC shown would work, it is just a question of what piston diameter you want. Smaller gives an easier pedal, but more travel. The one shown is for drum-drum brakes, which sounds like you might still have, though not clear why you removed the MC.
