Kevco Oil Pan

Here is kevko pan for 360 V8 in Ebody. The bottom of the pan is 1/2 inch above the hemi skid plate that is welded to the underside of the K-frame. The engine dropped in from above with no clearance issues...even had the headers installed when lowering the engine. The pick up tube has a bracket for attachment to main bearing cap bolt/windage tray attachment. I have ARP main cap bolts and the bracket was in the way, so cut it off.
The oil pan fit well, no leaks. I added a magnetic drain plug which thread into the existing drain hole with no issues. So far I would rate the pan and ease of installation two Thumbs UP!