New Best!!! 10.49 1/4 pass. In car video of run
here is a break down of the parts+ car. thanks Mopar65
1973 all steel dodge dart.that weighs 3520 with me in it. But i am in the process of putting a 71/72 dart front end on the 73 so i raced the car with the front bumper removed.
1973 0.030 over 440 block
wisco pro true flat top pistons 0.006 down in the hole
stock stroke steel crank
Eagle rods
very lightly bowl ported indy EZ heads 2.19/1.81 valves
Comp solid roller cam 264 @ 0.050
634 lift with crane 1.6 roller rockers
wieand tunnel-ram two pro form main body,s 750 dp carbs
tti 2x3-1/2 headers
727 transmission
CRT low band apply RMVB
CRT red eagle clutches/ steels
Dynamitc 9.5 converter that stalls around 4200-4400
8-3/4 4.30 gears
15x3-1/2 weld drag light wheels front
weld 15x8 wheels on back
M/T 275/60/15 ET street radials
cheep summit 3 way shocks on front set at 90/10
cheep ramcharger dodge truck shocks on back
mopar super stock 002/003 springs.
the engine is only around 10.9-11.1 compression and all runs wear made on 93 pump gas. My goal was to get the car to run 10.50 on pump gas and still be able to drive the car on the street. Which i will do next year.That is if i dont sell the dart to fund my 73 duster i want to build. any more questions fill free to ask. Oh also would like to say a very big thank you to joedust451 for helping me tune on the car. but like i said i think there is a lot more in it. thanks Mopar65:cheers::cheers: