400 low buck dont give a

:finga::shock::shock::boxing::boxing:well i think i have found the problem but not really sure..:shock::shock:well went back out to the shop for a few mins. and took all the bearings back out and cleaned them off ..something told me to check the part numbers on the bearing and make sure they match the box... and i will be damn the numbers on the bearings are 2321cp:wack: and the part number on the box is 4094m20 which is the bearing i need.. i tried looking up the 2321cp and came up with nothing..anyway i put the b ottom bearing back in the block and set the crank in it to look things over a little more and the crank its self is setting on the sides of the bearing and not even seatting it self down on the bearing..took the mics and check the crank and came up with 2.60 and the bearing is 2.58:finga: what the world is going on here???? i know i should have checked the bearings anyway but have had them here for some time now and just thought that they was right by the part number on the box..never thought that it would be a diff. part in the box...damn now i have to leave town and wont be back for a while and the thing will just sit here til then..:wack::banghead::banghead::banghead::banghead: