360 build suggestion

Here is the latest. All my machine shop work is going to be done at no charge. All I will need to do is put a sticker on my car. I will be running KB191`s with the heads down to 68cc`s and that will bring the compression to 12.5 to 1. There will be extensive work done to the heads. Comp Cams XE285HL with solid lifters. 273 rockers and the appropriate springs and pushrods. Looking for a used M1 and rebuildable 750DP. Stall will be 3000 and the rear end will be changed to 4.30`s with a spool, running a 29 or 30 inch stiffer wall slick to allow the suspension to work better. I think this will perform a little better than my 318.