Not A Body, (Caliber), Ball Joints

Okay boys and girls,...Here goes,...got the contol arm/ball joint out,...wasn't that hard really,....needed a 1 1/4 socket, 1/2 breaker bar w/cheater bar, 21mm socket, small pry bar, large hammer, and some PB penetrant to remove 3 bolts and 3 nuts,


[/ATTACH][/ATTACH]


...not much to look at,...easily a 1/4 inch play inna ball socket,...tomorrow I'll take it to the shop, press it out,...and hopefully replace it with a Moog ball joint equipped with a grease fitting,...