Painless wire harness install (MORE PROGRESS)

Mad Dart said

I would venture to say YES also. B+ is B+. Be sure when you solder them together that you double over the soldered joint with 2 layers of Heat Shrink on those wires!! I actually try to do that on all my soldered connections if possible. The second piece I cut a little longer than the first.

Click to expand...

just got off the phone with another tech that knows his ****..... the harness comes with 2 of the power wires to the switch because some ignition switches use two power leads. he said that the one wire is plenty but i can also splice them together. so i will be heat shrinking them all the way back to the fuse block and connecting them at the switch.

"B+ is B+" reading that makes me see it now. it comes from and goes to the same location, has to be put together.