Eddy heads on 416 stroker question

airwoofer said

That is pretty good flow or a generous bench. MRL only got 280 out of mine.

To the OP, I have a spare set of gold colored rockers on shafts that you can buy for $50 shipped. 2 of the rockers look like they were run with the adjustments loose as it appears that the pushrods ate into the bottom of the rockers where the adjuster is. Shouldn't hurt anything. You will need to buy a hold down kit like the one Hughes sells.

Also, the best geometry article I have seen yet is:

http://www.hughesengines.com/Upload/productInstructions/LengthCheckerDec2012.pdf

Click to expand...

Thanks for your offer on the rockers. I already have a set on the way. Already got the rerturn authorization on the open chamber heads and I will swap them out for the closed chamber heads. This site has been a huge help with these items. I am sure my machine shop who is actually going to set this all up will be double checking everything I give him, but I have always enjoyed trying to have a better understanding of the race/horsepower/torque stuff that I really am a little in the dark on.