66 dart convertible

Since december I've been dragging my butt around real slow, and got really smacked down right before christmas. must of had the flu or something. laid me up for a while but now I'm feeling a little better and decided to get some work done.
first order of business was to figure out the rear power windows. (check)
here's the hole I had to cut to get it to work. no going back to manual windows now!
View attachment DSCF3674.jpg
I needed some of the backing plate to weld to the original regulator
this is the new piece form a 01 dakota. just needed the mounting area
View attachment DSCF3675.jpg
here's the cutout leftover pieces of the dakota part
View attachment DSCF3677.jpg
and here's the piece you have to cut off the original regulator.
View attachment DSCF3678.jpg

I'll probably have to drill a 3rd mounting hole on the regulator. it flexes just a bit at full down and full up position. they are in and they work :cheers:

I have the seats mounted and in so I can test fit and build a custom console for the car. along with the door panels so that I don't put the armrests in a stupid position.
View attachment DSCF3656.jpg
I figure I'll set it up for all the goodies in the console. cup holders,power distribution a/c ducting to the rear seats, power window ,trunk switches and door lock switch if I ever install em.