**Help!! Need '66 'Cuda 273 2 bbl Throttle Cable Clamp**

Kind of lost which parts you are missing. The bracket that secures the throttle cable is small and bolts to a rear intake bolt, as I recall. If you put on an after-market 4 bbl intake, as I did, it sits too low. I currently have a Carter BBD on a 2-4 adapter, so even higher. I had to make a bracket off a carb stud to mount my cable clamp higher. I see used ones for 4 BBL SB's all the time, and they cost more (~$20).

At the carb, you need a Mopar "long stud" to fit the kickdown's slotted end. You can attach the throttle cable end to the same part or to another hole on the carb bracket. Some carbs require a $17 Holley Mopar adapter, a U-shaped piece you bolt to the carb's throttle bracket. You can find at Summit or Jegs. You can find photos of the Carter BBD (and AFB) setup for ~1965 in a search here.

In my 1965, the kickdown linkage goes thru a triangular pivot bracket that bolts to the rear of the left head, with 3 bolts I recall. I recall it is aluminum. It is fairly large, with a non-removable rod thru it, so unlikely you lost that.