Difference between 67-68 barracuda doors?

from the picture the quarter window is way out of adjustment.

Manual states
1) with door closed, position glass to half open position
2) adjust upper attachment of rear guide, outboard until glass is in design position at belt line and the outer belt weatherstrip is lightly contacted by the glass.
3) raise window until glass contacts roof rail weatherstrip.
4) adjust front track lower attachment so front of quarter window is aligned with rear of front door glass at roof rail and parallel to roof rail weatherstrip.
5) move regulator forward and upward until an effective seal is made with the roof rail weatherstrip and rear of front door assembly.
6) position front and rear up-stops down against stops on lower frame.
7) lower window until top of glass is even with quarter outside panel
8) adjust lower end of rear guide sleeve nut so rear end of glass lightly touches outer belt weatherstrip.
9) position stop on regulator plate against stop on center.

that should do it for adjusting quarter windows in a fastback.