Electronic Ignition Conversion Kit from Jegs. Questions..

right.....good advice on the dizzy there guys :pottytra:

im sure your kit has instuctions for installation ....just in case Mopar Muscle posted a real simple wiring diagram ...i have used it many times and it works every time

you can use half of a dual ballast resistor ....just make sure to mark which side is normal and which side is auxilary

unless you get the mopar performance ballast (P5206436)

Oh ....and you need a 70+ voltage regulator and harness plug ....i usually cut the harness plug off a donor car with about 3-4 inches of wire....just about any mopar 70-80 is good for a donor voltage regulator harness plug.