Painless wire question

This is why I REALLY don't like these types of products, as there is no diagram

I believe the 951 is powered juice coming FROM the hazard flasher, and going TO the signal switch. Is your hazard switch not right in the column switch? What year model we dealing with here?

All that the supplied wiring,

[ame]http://static.summitracing.com/global/images/instructions/prf-10127.pdf[/ame]

(See table on page 21)

does is to replace what goes from the signal switch to:

Front turn signals and dash indicator lamps

Rear turn/ stop lamps

I would not think there are any "not connected" wires in that section