poor man subframe connecters duster/demon

Wow these look great. I am using 2x3 1/8" tubing for mine. I decided to cut the floor, and lay them in sideways 2" tall 3" wide. I did this so i didnt have the tubing sit so tall in the rear footwell. It only sticks up 1/2" above floorpan, i will use extra carpet padding on either side before i lay the carpet.down. I also had an issue with the parking brake cable in the front crossmember. By putting the tubing on its side and moving the cables hole up in the crossmember it clears my subframe connectors.

With tubing on its side it overlaps outside the framerail. Mine will do the job, and are good enough for an autocross special, but yours look like they are factory installed.

If you would like to see and comment on mine go to the new thread in the chassis forum called subframe connectors redux, and check em out. The tubing in pix is thin wall .087" scrap tacked together to make a template out of. I have $27 invested in the thicker tubing, and $34 in a can of 3M weld thru ll primer. I love modifying, making my own parts, and swapping stuff from other applications to my car and making it work. Im a junkyard hound too

Again awesome job.
Matt