MSD E-curve Distributor Set Up???

GMachineDartGT said

I've been using this for years on my stroker. I'm not sure what you mean by complicated. I have mine set at 20 initial and chose at 15 degree advance program. I also chose the 10 degree vacuum advance. To me this is a breakthrough part that never got popular because its expensive.

Click to expand...

So with your set up your dials would be set like this. Lining up K and 3 on the vac side of the scale.

Switch 1=5
Switch 2=1

20* initial, 15* advanced all in at 2500 rpm with 10* Vacuum advance built in.

Of course you may have chosen a Longer or shorter curve so the switches may change.
Just an example so BrianT will know where he should be.