67' Barracuda 273 (Camshaft Results at the Track)

Crower Camshaft was put in.

Engine is a bit stronger above 5000 RPM's with Camshaft {#3}.

Based on calculations, should be close to 300 Horsepower (A gain of +5 HP over the General Kinetics Camshaft).
-----------------------------------------------------------------------------------------------------------------

* Camshaft Upgrade #3 ~ Crower Camshaft = .447 / .447 Lift ~ 268* / 272* Duration = (299 Horsepower) = 12.80 @ 106.86 MPH

* Camshaft Upgrade #2 ~ General Kinetics = .435 / .441 Lift ~ 282* / 282* Duration = (294 Horsepower) = 12.87 @ 106.45 MPH

* Base Starting Point #1 ~ Camcraft Camshaft = .440 / .440 Lift ~ 260* / 260* Duration = (280 Horsepower) = 13.04 @ 104.97 MPH
----------------------------------------------------------------------

Camshaft #3 (Crower) = Was responsive at Mid-Range and pulled well at early Top-End, before hitting peak.

Camshaft #2 (General Kinetics) = Very strong Mid-Range Torque. Flattened out at High RPM's.

Camshaft #1 (Camcraft) = A good 'Steady-Eddie'. Steady pull at Low-End and Mid-Range. Flattened in higher RPM's.