Lunati cam question

Should have welcomed you to the site before....Welcome! :D.

I have to congratulate you on building up a 3.31" stroke engine :thumbrig:. That's getting more rare these days. I get the sense that you know what your doing, so i don't have alot to add at this point, except a few reminders. With that amount of lift, the pushrod holes will more then likely have to be clearanced in the Eddy heads and i'd use a adjustable rocker with that setup to be able to keep lifter pump up to a minimum, along with a good set of matched valve springs. Also, since that engine is gonna want to rpm pretty high, a good balance job is mandatory. One good thing is, you have enough gear to get started, although in the end it may want a little more at the track. But that will save you a few bucks to put toward a torque converter from a well known builder that will work well with the current gear. No off the shelf stuff (TCI,B&M,etc.) for this build please :smile:. This is gonna be a nasty sounding small block, so all i ask is, when you get it all together and running, you shoot us a video so we can see/hear that bad boy run........

Rick