SRT8CUDA Build
Wait till you find out that the Milidon pan hits the rack on the AlterK, your gonna really be pissed. At least mine did, so did the Charlie's (pos) ended up using a Canton pan. Good Luck...
After we tried many different ways to get that rack into place - I thought you were right!!! Just no way could we get it in. Looked like there was no enough clearance between the rack and the front face on the pan.
jacked up the engine , lowered the RMS frame - still no way. Back and forth with Bill Reilly at RMS in many e-mails with photos and measurements. Bill had a '68 Dart in the shop he was working on. He had more clearance that I did so here is what he did today for me. This is his e-mail to me:
"Just for the hell of it, I cut the flange off the forward engine mount bushings, which allowed me to move the engine forward slightly. It now measures 1-13/16" from pan to mounts on the straight edge. Pics kinda blurry, but you can see where it's at.
Now for this next video, I didn’t raise the engine - it's actually resting in the mounts and bolted in with the tighter clearances - no jacking it up, no pry bars or cheating of any kind. Here's the link…" [ame="http://www.youtube.com/watch?v=kblVCnLrLuk"]Rack fitment. - YouTube[/ame]
After watching his video, I was able to get the rack installed and there is lots of clearance!!
I can't say enough good things about Bill and how helpful he was.