Anyone running a hydraulic clutch with their 833?

I know that this thread keeps getting resurrected from time to time. I'm doing so again because I'm thinking about giving my unhappy hydraulic clutch pedal kit another go. I bought it from Chuck's, but it's the same kit that Brewer's sells.

The only issue I have at the moment is that I'm unable to mount the master cylinder in place (as shown in this thread to be 2" beneath the clutch pedal pivot) because I have a large Hydroboost power brake setup. Obviously, the clutch master master cannot exist in the same space as the booster.

The problem with mounting the master cylinder in the stock location is that the pedal will only move 1" total when it needs much more. Something like 4-5". I left all of this behind me until az426hemi posted the pic of the cool-looking mechanical linkage adapter for the unit sold at mustangdepot.com. That mechanical linkage is a very clever way to solve the problem of having to mount the master cylinder so high up the firewall.

It seems to me that something very similar, or even the very same unit, could be used to drop the master cylinder into the stock location on my '65 Barracuda. But I have no fabrication capability at all. Does anything have ideas of the feasibility of a unit like this? I'm not using a hydraulic throwout bearing.

Thanks,
Marcus