Dads 67 "S"capade

Ooooh where to begin??? I spent the better part of 10 hours on my back under the dash. We got the tach wired up, radio hooked up and vacuum line for the a/c switch hooked up. Bezel was in, it just needed to be screwed to the dash, I went to hook up the speaker wire from the radio to the speaker, but couldnt get the wire from the radio loose...Im like wtf??? When we mounted the radio to the dash frame the frickin speaker wires from the radio got wedged between the radio and frame....we didnt notice and snugged up the mount nuts...So now the bezel has to come out partway, then the radio mount nuts off and pull the radio out partway... then wrestled with the wire for 10 minutes to get it out.
New LED's I installed most of them wont light up. I should have bench tested the dash before installling. I have got about 1/2 of them working. But signals inside dont work, and ones around speedo dont work either. Signals outside and 4ways work, as do brake lights and headlights.
Radio installed, but I think the antenna is pooched, we had Wards install an aux jack, so we plugged in the Ipod and it works. So why no radio?? Might be the antenna.
Tach works!
I am not the most patient guy, but it was beyond ridiculous trying to change the LED's from under the dash...I could reach4 or 5 but not all....any ideas??

Legendary door panel installed on pass side, but the tool to "split" the masonite is ridiculous!!

Im sooo ready for a left-handed cigarette right now!! LOL