Turbo 383 in a A-body Barracuda

just kept looking at the radiator support and finally decided to go ahead and move the radiator back as far as i can which is 3/4" of an inch lot of work for 3/4" of an inch went and welded a lip on the back side of the header panel and it it had to change some what do to the hood latch assembly also had to build a gusset around the pull arm because it sits towards the engine bay 5/8" of an inch past the face of the header panel then cut the lip off the back side and fabed up two filler panels to rebuild the face of the radiator support i tin knocked two holes in them one for the inter cooler pipe and one to get air to the intake and help cool the turbo only got one side welded in still have to weld the other side in tomorrow