5.9 FI Magnum swap in 73 swinger

Are you running the battery temp sensor? I kept the one on the harness and routed it to the bottom of the battery tray. I remember reading that it wont charge the battery it the sensor isn't there. I just drilled a big hole and set the sensor down in so it's pressed against the bottom of the battery like it was in the stock location. I still have to get my O2 sensors wired in as well, mine will load up the plugs if I let it idle for 5-10 min. I had it running for a while over the weekend so I could get it warmed up enough to check the trans fluid level and run it through the gears.

What are you using for a throttle cable and pedal setup?