How To:Biggest Magnum TQ Monster

If you dip into the trans, a few things that came to mind during the evening that will be helpful:

Get rid of the wavvy snap rings, go solid, go to factory tight tolerances, and download the atsg manual.

I've got it somewhere if you can't google it.

Do tear it down and inspect before you make your order so you know what you need. I hate the back and forth orders... :violent1:

Your going to need a press for the OD section, there is a looney toon spring that holds everything together that's under 800lbs of pressure.

After all that wittrans should have everything you need for on the cheap. They also have blow up diagrams on their site so you don't get lost.

Take your time, air test it, check it three times before you put it all back together. :)

:burnout: