360 Magnum heads conversion

The top P/N will give a magnum head adjustable rockers.
The bottom is for an entirely different animal.....roller rockers for AMC / GM etc.
You will need AMC lifters and oil through pushrods ........ I don't know of any " kit " to adapt Magnum heads to an LA block , but there is a list of parts you can change to make them work.
The intake bolt holes will need to be addressed too.


O.K. ......... my bad. If you want to use a roller rocker , you would use the bottom p/n to complete the heads.
Still need lifters / pushrods / manifold bolt hole adjustment. ( or just use a Magnum manifold )
Some heads have provisions for either pattern I think , but std. magnum bolts go straight down and LA's went into the head at an angle.
You have a couple choices as to blocking the oil passages in the deck to the head , since you won't be needing them anymore.
Magnum head bolts.
Accessory mounts will be different too.
Valve covers are different.
That's about all I can think of