Oil Filter Relocation

I had the plate system and I had to use 2 AN 90's out of the adapter to clear Hooker headers. You have to use a regular short 90 and screw it in first and point it up (or down, whatever works in your case) then you have to buy a LONG leg 90 and screw that in (2 shorts will hit each other and not screw in) and point that in same direction. I used hydraulic hose and industrial 2 piece screw on fittings on each end and mounted the oil filter on the inner fender facing forward. I used a filter with an anti-drain back feature (HP-1 and better brands) to minimize cold start oil delay. put rag under it to change filter EZ clean up. They sell these finned Aluminum heat sinks you can slip on the filter too to make it look a little sleeker, good for a few degrees of oil cooling or a few degrees hotter under the hood, your call.