Duster Dash Removal - Guide on how to

Some are a lot easier than others.
here's a little tip that may help in reinstall.
The one ALT' gauge stud that gets the red wire is marked on the circuit board but we may not be able to see that easily. Flag it with a piece of tape or something while at the workbench.
The round harness connector is keyed in its center to attach only 1 way. Again hard to see.
I tranfer that key to the outer diameter of the connector so I can feel which way is up. The tape will keep the wires from comming out of their correct ports also
I like white tape in dark places.