Bill that 650 should be at your door sometime today. Fyi the toad is running again:blob:let's hope were in the two step forward stage for awhile I don't think I can take many more three steps back:banghead:.
Aaron, it's on the car. We had to swap float bowls with the carb we had on the engine, because their fuel inlets are on the driver's side, and the 650 was set up for passenger side fuel delivery.
The stud length for the carb bonnet was perfect.
It was a trouble-free bolt-on... no issues whatever.
Thanks again!!!:cheers:
We'll drive it on Monday with the A/F ratio monitor in place to see if the jetting is right for our motor. I'll bet it is! :D