Magnum Kegger Mods

ok i kinda wanted to have it mostly completed and its there so here are more pics!

Last pic i had was of the interior intake port adjusted. here are the rest.


Ok the first pic is the stock port(right) and the gasket matched port (left) big difference!

Second pic is of the injector "fuel path" on the inside of the port. you can see how i leaned the path away from the injector centerline as well as slightly widened it, stock the fuel actually hits the edges as seen by carbon buildup.

Third Pic is of finished ports and also one of the "volume reducers" welded in. i only had access to a spool welder so thats what i used, and let me say just find a tig or pay someone if you cant tig. it will be much cleaner and alot less work!

4th pic is using the original belly plate as a template for the new 1/8" one, stock is about 18ga.

5th pic everything has been completed and also blasted inside and out, the blasting cleaned everything as well as but a soft texture that smoothed out most everything.

6th pic is where i installed another 1/8" NPT as i plan on using a Phantom II temp gauge. some intakes will have two of the holes drilled and some will only have one, the reason is that earlier motors ran two temp senders, one for the gauge and one for the computer.

last pic is all been washed and will dry over night, then will install the new plate and gasket and left to cure for a couple of days to ensure it has cured!