1967 Barracuda grille assembly

I use a die grinder to grind off the factory rivet heads. Then the grille will come apart.
Use a hammer to knock the old carriage bolts out. At this point you can install new carriage bolts and weld them to the supports OR use (link below) with these clips they will lock against the frame. Install them and then install the supports over them. rivet them back together. 1/8 in pop rivets work. It takes about an hour a grille.




http://www.ebay.com/itm/trim-clips-...Parts_Accessories&hash=item2eb79e6596&vxp=mtr