71 Duster 360 (new project)

parts .......

360 with gas carb...

360 with E85 carb....

set the floats...and it fired right up....had the idle screws at 1 1/2 turns out on all 4 corners...pretty rich...screwed in both primary and secondary screws on driver side...engine still ran...screwed in secondary idle screw on passenger side...it died....whew...glad it died....LOL

ended up with all 4 corners about 3/4 turn out....

instructions with the QFT metering blocks suggested increasing jets 8-10 jet sizes from the gasoline size....had 73-81 gas....pretty sure i went a little rich with 84-92.....got a case of CRS this morning...

I used those jets based on what i have in the QFT 950 E85 carb.....which has 86/94 in it....Have to get the LM-1 hooked up to it and see what i get