Cal trac /mono leaf results

Thanks everybody. I called and talked to John Calvert for about 45 min. Very polite and gave me a bunch of info which I will share after some inspection:
3 points of intrest
1 shocks with transbrake should be on softests #1
2 My bias tires can go down to 10 lbs
3 check front alignment @ 3 points. ride height, 2" raised, 4 inch raised.It should maintain 1/4" of tow, so that the car will be stable at 10 psi in the traps.
He said to set the shocks on #1, add 1/4 turn pre-load,bottom hole top hole not that big of a deal.
Then don't mess with the bars, then experiment with tire pressure, rear shock adjustments (going to firmer) and launch RPM's
Running or not running tubes should go to the back burner. Something I could try later if I want, but not a big issue at this point.
More later, and thanks for all your help.