i had to do some fabing. but if i can do it so can you. well on the rad i just got some L shaped aluminum and had them welded on the sides of the rad. on the fan i had to cut the tabs of the side of the fan sharoud (spelling) and got some little L shaped metal strips to mount the electric fan to the rad. i used the tab that is on the top of the fan and ran a bolt through it and the top of the rad. you can see it in the second pic. let me see if i have a few better pics of the set up. also the ford fan has a low and a high speed.the high speed is so posed to be around 4500 cfm. which is what i have wired up. another fan that is a good fan is the Chevy HHR one. but i like the ford better because the fan motor is off set to the left. it cleared the CVR electric water pump a lot better than the HHR one.
