73' B3 340 Duster pro touring build

I had some time to work up the motor plate, I fixed the gaps between the heads and the front plate and trimmed the overhang again between the heads and motor plate, recessed the motor mount ears so that everything is flush..and finally milled off the excess material at the bottom and inserted 5/16"-18 Heli-coils in the 12 holes that hold the 3 pieces together for extra strength. I will replace the bolts in the picture with Button heads.

I also had another Test fit date with the front bumper and the car...everything fit nice on the ends but I decided to bring it home and add 3/4" to the back edge and then will grind to fit the factory contour in the Fender within 1/4". I also took the opportunity to mock up the front spoiler.