Help with Addco Sway Bar

On the 66 Barracuda pictured on post #6, it is my sister-in-laws car which she has had since her father died and used as DD for many, many years. Pictures show later (74) disc brake conversion. It uses the later style upper control arms and larger ball joints. The spindles can be mounted either caliber forward or back, main effects brake hose routing. I had them mounted rear at first and then changed to front mount after reading on these forums about addco sway bar mounting issues. I copied someone elses ideas on the frame mounts from there pictures. THE only thing uncompleted on sway bar install is tack welding shock bracket to lower control arm. Will have to remove lower shock mounting to protect the rubber bushings from the heat.
That said on my 65 B-Body lower sway bar, it ended up as short link system at the ends. It MIGHT be the same bar for both aplactions. No pictures of that install. Sorry.
Oh yes one other thing was the first sway bar ordered was wrong in the paper catolog, so this is the replacement bar which did fit. Classic Industries bar #FSB751, there is a up side differece in the angle of the end link.