Help with Addco Sway Bar

Valkman, my pictures were taken with the car weight on the blocks. That makes the LCA not hanging down and closer to bar ends. My calibers are pointed forward, same as yours. I used supplied end links from the kit. My sway bar mount is level and everything lined up fine before install. I wanted as much ground clearance as possible and everything tucked in. My end links do point down, but if anything were to take them out then it would also take out the tie rod ends also. Anything that bad would have to be caused by driver stupidity. Make the templetes from cardboard and use heavy metal straps from Home Depot. Little metal was used and a lot of cutting and grinding was done. Also both sides will be a little different from each other, so test fit often. Once started you should finish in 1-2 days with fitting and welding.