71 Duster 360 (new project)

70aarcuda said
i am using steel braided line, the fuel cell is a RCI 8 gallon...polyshit...

conversion kit is from Quick Fuel Technology their metering blocks..

http://www.summitracing.com/parts/qft-34-106/overview/

you will also need stainless steel needle and seats....the accelerator pumps must be the newer GFLT material...and check to see what the floats are made out of....

I also installed larger 50 cc pump , and squirter with hollow screws...also installed a high flow power valve....

maybe some of these parts might not be needed on a street car...

Thank you for this. The car is far from a "Street" car mostly a race car driven on the street. I want to run E85 for when I start using nitrous that the octane will be closer to what it should be, even if I run a small cell for the race gas. Thanks again, looks like I need to get steel lines or braided. But if I stay classic 91, this is good info to have no matter what!