318 no start after sitting
I've got a very good spark coming off the coil wire into the distributor.
I've got all the MSD material now.
Yes it was running and starting just fine before
I'm thinking the issue's in the triggering as the EFI's not acknowledging a startup command but will turn on, as well as the ignition system is turning on but no acknowledgment of you cranking it over so no spark to plugs.
Just strange that this could happen due to sitting. Gonna check for 12 volts to the distributor. Maybe the 6A's bad as that could explain it as it sends the triggering signals, may try re-wiring so the 6A's not used if the dizzy checks out.