slick shift cuda

Talked to a very knowledgeable person named Paul at Liberty Gears today.
Slick Shift- Removed every other synchro tooth off the gear itself of second, third and fourth.Discarded the brass synchro rings, engagement keys ,and wired spring rings, and removed every other internal spline on the "slider" (slider hub that the fork engages into). First gear synchro teeth on the gear were left alone yet no longer allow synchronization with the brass synchro discarded. 36 engagement teeth and internal splines become 18. Do Not try to remove two keep one, remove two, keep one etc. This will create an impossible mesh pattern.Yes this is race only.