My 70 Dart

Ok, sprayed more surfacer and then sanded. But first I used a filler called Icing. Needs a hardener to activate it. I used the Icing on the drivers quarter panel see last two pictures. Well.........I thought I kneaded the cream hardener good enough, but when I added it to the Icing, it was very runny. Needless to say, it didn't set up over three days! I had to go back and sand it out using 80 grit paper, and it gummed up and clogged the paper. I got the hardener right, I tried a small sample before use. It set up and I sanded it with 220 grit after about two hours. Went golfing today, Monday the 19th and am pooped out. I will spray the black surfacer first thing tomorrow morning and let it cure. Usually takes about a good three hours. Should be pretty darn close now. Ok, enough blabbing, on to the pictures.