flowed my magnum heads for my 360 build.

Sounds good, I only took a few during the porting, but I will disassemble the heads and take pics, of what was done.
Couple things I did find out, I opened up the pockets to 92% of the valve size, cut the .375" off the intake guide, stream lined it. The short side on the intake kept picking up the more I laid it back. pushrod pinch was opened up .185", raised the intake port roof entrance .090 and blended it into the roof. The exhaust port , was opened up, guide boss is basically gone, little lump left. the short-side is laid back and smoothed, I think there is more in the exhaust, but Im afraid to hit water! I need to cut a magnum head apart and see what it looks like.